RL78/G13 CHAPTER 12 SERIAL ARRAY UNIT
R01UH0146EJ0100 Rev.1.00 675
Sep 22, 2011
The peripheral functions used for the LIN communication operation are as follows.
<Peripheral functions used>
• External interrupt (INTP0); Wakeup signal detection
Usage: To detect an edge of the wakeup signal and the start of communication
• Channel 7 of timer array unit; Baud rate error detection
Usage: To detect the length of the sync field (SF) and divide it by the number of bits in order to detect an error (The
interval of the edge input to RxD2 is measured in the capture mode.)
• Channels 0 and 1 (UART2) of serial array unit 1 (SAU1)
To Next Page
Loading...
Need help?
General
