Renishaw NC4+ Blue - Laser Safety and Warning Labels; Location of the Laser Aperture

1.3
Safety
激光辐射
请勿直视激光光束
Laser safety and warning labels
Label B
Label A
Laser ‘On’ and probe status LED (see “Probe status LED
function” on page 2.2 for further information).
NOTE: Labels A and B are tted to
the transmitter unit only.
An adhesive warning label is
provided for attachment outside the
machine.
*
Except for deviations pursuant to
Laser Notice No. 50 dated June 24 2007
Label A Label B
*
Location of the laser aperture
Access panel identification markings, denoting system range
(see “Access panel identification markings” on page 2.2 for
further information).
Laser aperture
Caution symbol (for more information, see
“CAUTION symbol” below)
CAUTION – Laser safety
The access panel is to be removed for service
purposes only using the special tool supplied.
Before removing the panel, switch off electrical
power to the transmitter unit to avoid exposure to
the laser beam.
CAUTION symbol
The caution symbol on the access panel denotes
the following:
CAUTION – Class 3R Laser radiation
when open. Avoid direct eye exposure.
This text is not included on the access panel due
to the limited space available.
!
!