1-1
www.renishaw.com/ts20
Before you begin
Warranty
Unless you and Renishaw have agreed and signed a separate written agreement, the equipment and/or
software are sold subject to the Renishaw Standard Terms and Conditions supplied with such equipment
and/or software, or available on request from your local Renishaw ofce.
Renishaw warrants its equipment and software for a limited period (as set out in the Standard Terms
and Conditions), provided that they are installed and used exactly as dened in associated Renishaw
documentation. You should consult these Standard Terms and Conditions to nd out the full details of your
warranty.
Equipment and/or software purchased by you from a third-party supplier is subject to separate terms and
conditions supplied with such equipment and/or software. You should contact your third-party supplier for
details.
CNC machines
CNC machine tools must always be operated by fully trained personnel in accordance with the
manufacturer’s instructions.
Care of the probe
Keep system components clean and treat the probe as a precision tool.
Patents
Non applicable.
Intended use
TS20 is a hardwired 2-axis touch-trigger probe used for tool setting on CNC lathes.
To Next Page
Loading...
Need help?
General
