Renkforce WH2315 - C) Setting Mode

71
c) Setting mode
• The basis station must be in normal mode. Now keep the button "SET" (5) pushed for 2 seconds to start setting
mode.
• Thetwolowertextlinesshowtherstsettingfunction"TIMESETTING".
 Toleavethesettingmodeinanyplace,brieypushthebutton"HISTORY"(7).Thesettingsmadeare
saved.
Alternatively, wait for 30 seconds without pushing a button. Setting mode is ended automatically in this
case.
• Use the " " (3) button to chosen between the different setting functions. For a description of the following setting
functions, see the next pages.
"TIME SETTING"
"UNIT SETTING"
"RECORD SAVE INTERVAL"
"RAIN SEASON SETTING"
"BAROMETRIC SETTING"
"CONTRAST SETTING"
"KEY BEEP SETTING"
"REREGISTER TRANSMITTER"
"CALIBRATION SETTING"
"TRANSMITTER ID"
• Whenthedesiredsettingfunctionisdisplayed,brieypushthe"
" (4) button to start the associated setting menu.
• Change a setting with the button "
" (1) or " " (2). In some setting functions (e.g. for manual setting of time/
date), quick adjustment is possible if you keep the corresponding button pushed for a longer time.
• Switch to the next submenu within the respective setting function with the "
" (4) button.