Renkforce WH2315 - E) Minimum;Maximum Mode

79
e) Minimum/Maximum mode
In this mode, you can have the saved minimum and maximum values displayed.
• Thebasisstation mustbeinnormal mode.Nowbriey push the"MIN/MAX"(8) buttontostartthe minimum/
maximum alarm.
• The two lower text lines show "TODAY MAX".
 Toleavetheminimum/maximummodeinanyplace,brieypushthebutton"HISTORY"(7).
Alternatively, wait for 30 seconds without pushing a button. Minimum/maximum mode is ended automati-
cally in this case.
• Brieypushthebutton"MIN/MAX"(8)repeatedlytoswitchbetweenthefollowing4functions:
"TODAY MAX" Maximum values of the current day
"HISTORY MAX" Maximum values since the last reset
"TODAY MIN" Minimum values of the current day
"HISTORY MIN" Minimum values since the last reset
• Use the "
" (3) or " " (4) button to call the time and date of occurrence in sequence for every minimum or
maximum value.
• Every minimum/maximum value can be deleted/reset by keeping the "SET" button pushed for 2 seconds.