EasyManua.ls Logo

Renkforce WH2600 - Mount the Weather Station

Renkforce WH2600
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 7 -
4.3.4 Mount Weather Station
Fasten the mounting pole to your mounting pole with the U-bolt, mounting pole brackets and nuts,
as shown in Figure 7. Tighten the mounting pole to your mounting pole with the U-Bolt assembly.
Make sure your mounting pole is as far away from the temperature sensor as possible, as shown in
Figure 7.
Figure 7
Reference Figure . Locate the four wind vane compass rose indicators of N, E, S, W
(representing North, East, South and West). Align the compass rose direction upon final
installation with a compass or GPS.
Figure 8
Note:Please use good quality alkaline batteries. The batteries are intended for back-up power only.
The solar cell current charges the supercapacitor.

Related product manuals