In Light On/Off the user sets to load to be operated
by the time of day.
The load terminal automatically turns ON when the
solar voltage goes BELOW the point of NTTV
(Night Time Threshold Voltage).The load
automatically turns OFF when the voltage goes
ABOVE the point of DTTV (Day Time Threshold
Voltage). There is a delay between turning the
load on or off and can be programmed to be from
0-99minutes.
NOTE: Minimum and maximum charge parameter
values can be found in Technical Specifications
Similar to Light On/Off parameter with the addition
of a timer that the user sets in order to indicate how
long a load will be on or off. The user also sets an
appropriate time for when it is night time.
Nightime12 indicates the remaining time between
the Load being on and off
NOTE: Timer needs to be activated for it to work
Using a 24-hour clock, the user is able to set the
time for when the load will turn on and the time for
when the load will turn off. The system works fine
with just one timer, the second timer serves the
purpose of dual functioning. For example, if the
user wants to turn the load on and off within 3
hours of night time and turn the load on and off
again before sunrise they will be able to with a dual
timer.
To Next Page
Loading...
