3.Press MHZ/SET key to save settings, or press any other key to cancel.
DTMF Lock
When you want to forbid using keyboard to avoid DTMF transmission, DTMF lock function can be activated.
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number31 (DT.L).
2.Press MHZ/SET key and rotate the coding knob to choose ON or OFF (default).
3.Press MHZ/SET key to save settings, or press any other key to cancel.
4.Press any other key to exit menu mode, except MHZ/SET key.
When the function is activated, DTMF tone can’t be sent through the keyboard. DTMF memory transmission also is banned.
ANI Identity Code
The ID code is composed of 3 to 10 numbers. The mobile radio will make a prompt when receiving matched codes.
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 51 (ANI).
2.Press MHZ/SET key and rotate the coding knob to choose ON or OFF (default).
3.Press MHZ/SET key to save settings, or press any other key to cancel.
4.Press any other key to exit menu mode, except MHZ/SET key.
Remote Kill/Activate
The function can remote turn on/off the receiving and transmitting function by transmitting remote kill codes.
Remote kill code is composed of 1-10 DTMF codes and can be set through programming. When the mobile radio with remote kill codes
receive the code, the mobile radio enters remote kill mode. After receiving activate codes (kill code + #), the mobile radio restores normal
working mode. Turn on/off the function can be set by programming (OFF: default).
Two remote kill ways can be set by PC software:
• Ban transmitting
• Ban transmitting and receiving
2 TONE Signaling
Tone A frequency: the frequency of the first tone in 2 TONE.
Tone B frequency: the frequency of the second tone in 2 TONE.
Tone A duration time: Transmission duration time of the first tone in 2 TONE.
Tone B duration time: Transmission duration time of the second tone in 2 TONE.
2 TONE interval time：The interval time between the end of the first tone and the beginning of the second tone.
Long tone A duration time: The first tone duration time of a tone (Only set the first tone, the second one is void), referring to the transmission
duration time of the first tone in 2 TONE.
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 33 (2 TENC).
2.Press MHZ/SET key and rotate the coding knob to choose 2 TONE code group numbers, OFF (default), 1~32.
3.Press MHZ/SET key to save settings, or press any other key to cancel.
4.Press any other key to exit menu mode, except MHZ/SET key.
2 TONE Decoding
Compound method: choose compound methods to use 2 tone decoding, can be divided A-B, A-C, A-D, B-A, B-C, B-D, C-A, C-B, C-D, D-A,
D-B, D-C, long A, long B, long C and OFF.
·Respond method: the respond method of the mobile radio after receiving matched 2 TONE calling.
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 34 (2 TDEC).
2.Press MHZ/SET key and rotate the coding knob to choose 2 TONE decoding group numbers, OFF (default), 1~8.
3.Press MHZ/SET key to save settings, or press any other key to cancel.
4.Press any other key to exit menu mode, except MHZ/SET key.
MSK Signaling
Use MSK signaling to proceed the call between mobile radios. The mobile radio ID code and objective mobile radio MSK ID code need to
be set in advance. MSK ID code is 16 decimal data and up to 4 bits, the range is 0~FFFF.
MSK encoding
● PTT ID Type
To use MSK signaling to call other mobile radios, PTT ID type should choose MSK.
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 58 (IDSOR).
2.Press MHZ/SET key and rotate the coding knob to choose PTT ID type, DTMF (default), MSK.
3.Press MHZ/SET key to save settings, or press any other key to cancel.
4.Press any other key to exit menu mode, except MHZ/SET key.
● MSK Prompt Sound Monitor
When sending signaling code, the mobile radio speaker will have a prompt when the function is activated.
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 54 (MSKM).
2.Press MHZ/SET key and rotate the coding knob to choose ON or OFF (default).
3.Press MHZ/SET key to save settings, or press any other key to cancel.
4.Press any other key to exit menu mode, except MHZ/SET key.
● MSK Roger Beep
When the function is activated, the mobile radio will make a beep to prompt MSK signaling has sent after sending.
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 55 (MSKBP).
2.Press MHZ/SET key and rotate the coding knob to choose ON or OFF (default).
3.Press MHZ/SET key to save settings, or press any other key to cancel.
4.Press any other key to exit menu mode, except MHZ/SET key.
MSK Call List
You can choose MSK call numbers you want through MSK call list. Each call number corresponds to a targeted mobile radio MSK ID
number. You can input the MSK ID number you want to set through the MSK call list of the PC programming software.
15
To Next Page
Loading...
