6. Supervision- and control software
User manual RHF-Active 36
6. Supervision- and control software
6.1 What this chapter contains
This chapter contains guidelines for using the supervision and control software. There are hints
how to check the parameters before commissioning and how to optimize them during operation.
This chapter has been shortened. For further information regarding connection and
commissioning please refer to the RHF-Active commissioning guide.
6.2 Introduction in the system
There are two versions of the software:
RHF-Active Configuration V3.2.7 (or higher)
RHF-Active 15, 35,55A, 100A, 150A
6.2.1 Log In
For connection of the RHF-Active to the PC the latest RHF-Active PC software should be used.
This can be downloaded from www.revcon.de or requested from info@revcon.de
During download of the software, please ensure your antivirus software is not changing the
name or delating the exe file: “RHF-Active-SiC.exe”. Execute this exe to start the software. The
following Login for easy access can be used:
Login: 01
Password: 010101
Higher access level can be requested from REVCON.
To Next Page
Loading...