REVCON RHF-Active - 9 Revcon; Revcon Product Overview

9. Revcon
39 User manual RHF-Active
9. Revcon
9.1 Revcon Product Overview
1. REVCON
®
RLD
Power feedback units for short time operation
(Crane systems, discontinuous centrifugal, etc.)
2. REVCON
®
RHD
Power feedback units for continuous operation
(Engine test beds, escalators, wind energy plants, elevators etc.)
3. REVCON
®
RFE
Power feed and feedback units for continuous operation
(Engine test beds, escalators, wind energy plants, elevators etc.)
4. REVCON
®
RSU
Step- up converter for the generation of a current controlled, high output voltage from a
lower input DC voltage.
5. REVCON
®
RSD
Step- down converter for the generation of a decreased output voltage from a higher DC
voltage (AC input is also possible).
- Voltage controlled: A free selectable output voltage in wide limits
The required output voltage can be adjusted by set-point (0 ... 10V)
- Current controlled: A lower output voltage that adjusts free in dependence of the load
The required output current can be adjusted by set-point (0 ... 10V)
6. REVCON
®
EDC
Power supply module for multiple motor applications (supply of multiple drive controllers)
without generator- operation
7. REVCON
®
RHF-8P/5P
Revcon Passive Harmonic filter. Reduces the harmonic distortion of a drive to <5% or
10%
8. REVCON
®
RHF-Hybrid
Combines the advantages of active and passive harmonic filter.
All products are available for 400V line voltage, the most also for 230V, 400V, 460V, 500V,
600V and 690V! According to the product power from 4 to 440kW can be transmitted, whereby
the most products are appropriate for parallel connection, so that power ratings until the
megawatt range can be achieved!