34
j Press the (+) Intensity Control once to
start stimulation.
Continue to increase the intensity until you feel
a strong but comfortable tingling sensation without
it causing you pain. You can set the intensity between
1-99.
You can use the buttons on the device or
remote control.
Press the (+) button to increase the level.
Press the (–) button to decrease the level.
k The Time display will start to count down in
minutes as Revitive cycles through its program.
When Revitive times out, you will hear three beeps,
and the device will switch itself o automatically.
Instructions for use
If you feel pain or discomfort:
• Lower the intensity of the Body Pads using the (–) Intensity Control on
the device or remote control.
• You can also choose to stop therapy before the end of the 30 minute session.
You can do this by pressing the power button on the device or on the
remote control
Never start at a high level of intensity. Keep Body Pads in place at all times, start at
lowest intensity and slowly increase the intensity.
Do not use when the body pads are open circuited (e.g., when the pads are held in
your hands). Do not remove electrodes when stimulation is being applied (to avoid
unintended possibly hazardous stimulation).
To Next Page
Loading...
