8
Step 3
Power on the Camera and Format the Memory Card
Power on the camera by connecting the charger to the car cigarette
lighter and camera. To ensure the R316 records to your memory card
properly and without error. Before you start using a new memory card, you
must format the card within the camera using the format function. Always
backup important data stored on the memory card before formatting.
To format the memory card, make sure you have inserted your memory
card, then turn on the device by connecting to a power source. Press OK
to stop recording. Then press the MENU button twice to enter the System
Setup Menu. Use the and buttons and toggle to the Format
setting. Press the OK button to confirm the selection.
You may now disconnect from power. The camera will shut down after 3
seconds. The camera should begin recording automatically the next time it
is powered on.
System Settings
Back road mirrorIn-car mirrorWDRLight Frequency
Parking MonitorLanguageScreen SaverFormat
To Next Page
Loading...
