Reverse Line Calibration
Note: It is recommended that users manually format the SD card
regularly.
Select ‘Format’format your SD card. It is recommended to
manually form format the first insert SD card to ensure sufficient
card capacity.
1. Access the settings by clicking [Reverse Line Calibration].
2. Park your car centrally in the parking space.
3. Adjust the left reversing assist line: Drag it manually to align
horizontally with the left ground parking line.
4. Adjust the right reversing assist line: Similarly, drag it to align
horizontally with the right ground parking line.
5. Use the slider at the bottom to fine-tune the left and right
positions of the reverse line.
6. Once calibrated, click [confirm] to save the adjustments.
Select ‘Factory reset’to restore device to the original system
settings to enter the settings.
Select ‘Firmware Version, to view the current version.
28
To Next Page
Loading...
