**The device is charging or powered on when the LED is solid white.
Screen Icons
4.Installation
Step 1: Install the Dash Cam
Place the 3M tape on the Mount and properly orient the Mount square to the roof and hood line of the vehicle.
Important! Ensure the T-interlock on the Mount is oriented in the correct direction. Firmly press the Mount onto the
windshield. Wait at least 20 minutes before mounting the camera. On the illustration Orient the mount as shown.
Step 2: Insert the Memory Card
The Rexing V1P Max accepts [Class 10/UHS-1 or higher] Micro SD memory cards up to 256GB. You will need to
To Next Page
Loading...
