5.Basic Operation
Device Power
The device is automatically powered on when plugged into a 12V accessory socket or cigarette lighter and received
a charge (i.e.: the vehicle is started).
To turn the device on manually, press and hold the Power button until the welcome screen appears. The camera will
automatically start recording when power on.
Menu Settings
Power the camera On. If the camera is recording, press the REC button to stop recording. Hold the MODE button
and toggle to the desired mode. Press the MENU button once to enter the settings menu for a Mode. Press the
MENU button twice to enter the System Settings (Set up).
Video Recording
The camera will automatically start recording when the device receives charge. The LED lights and red dot will blink
red device when recording. Press the REC button to stop recording.
EMR Mode
To Next Page
Loading...
