pcProx
®
and AIR ID® Enroll Readers
Red LED
When selected, the SDK has control of the RED state.
Green LED
When selected, the SDK has control of the GREEN
state.
Multiple USB Readers on a PC
This section does not apply to the RS-232 readers since
these are attached to individual COM ports.
This field will show how many readers are attached to
the PC.
User may attach up to 16 different pcProx-USB or AIR ID
Enroll USB devices on their PC at one time. End users
may determine the card reads from the various readers by
configuring a ‘Leading Character’ to be inserted in front of
the card data. You will need to attach one reader at a time
in order to preset this particular’s reader ‘Leading
Characters’. There is no way to use the unique addressing
without working with the SDK (the software developer’s
kit).
Enter Unique Address
The Unique Address is for software developers who
intend to attach more than one reader to a given system at
a time. This feature allows the developer to talk to
individual reader and determine which reader the card
data came from.
If you are a software developer, and have purchased
SDK, you will need to write a unique address into the
reader. Once you have written the unique address, you
can selectively communicate with each device to learn
which reader sent the card data stream.
To Next Page
Loading...
