pcProx
®
and AIR ID® Enroll Readers
performed differently for each operating system and
application. Please refer to your User’s Manual for
detail.
In general, you will enter your Old Password, and wave
the proximity token to fill in the New Password and if
applicable, the Confirmation Password fields. If the new
password is made up of the card data + a user supplied
PIN, you will need to add this PIN in both the New
Password and Confirmation Password fields.
If the pcProx reader is configured to append the ENTER
keystroke, you will have difficulty since the ENTER
keystroke will complete the operation before both fields
are filled in. To avoid this, it will be necessary to re-
configure the device for this Change Password operation.
Once the user performs this operation, the card may
now be used as the password.
Log-on
The operating system loads the USB driver prior to
logon, leaving the device ready to function as a logon
device.
To Next Page
Loading...
