RF Mogul Eagle - Page 10

9 | P a g e
RF MOGUL 3604 South Via Terra Salt Lake City, Utah 84115 Sales: 801-895-3392 Email: sales@rfmogul.com Rev 8/20
7. Feed the Coax Cables harness (split loom) through the pre-drilled hole in the reflector from the
back side.
8. Attach the Reflector loosely to the Brackets on the Mount in the top 2 holes using 2 of the
¼”-20 x ¾” Philips SS screws that are provided. Align the remaining 4 holes then tighten the top 2.
Split Loom