Eagle TV Installation
Roof Mounting and Sealing
Materials Provided
1. RF Mogul Antenna
2. Antenna control unit with power supply
3. Pre-terminated control cable for ACU-1
4. Clam Shell Cover
5. Weather Cover Junction Box
6. LNB Landing Plate
7. ¾” Mounting screws
8. 10 Black Wire ties
9. 10 Black wire cable clips and screws
Materials Not Provided
1. 9 V DC Battery
2. 7/16” wrench
3. ¼ inch nut driver
4. Small diameter drill bit long enough to go through the roof of your coach
5. Small standard (jewelers) screwdriver
6. 1” hole saw
7. 1 power strip or uninterruptible power supply suitable for your application
8. Appropriate bit for the mounting screws
9. 1-2 tubes of DICOR self-leveling sealer (available at most RV dealerships)
10. 1 tube of dielectric compound (Boss Products Accumetric, LLC www.bossproducts.com)
11. 1 tube clear silicone #315 (Boss Products www.bossproducts.com )
12. Split loom cable wrap
To Next Page
Loading...
