RFI U-router NGW User Manual

The information contained in this document is subject to change. This document contains proprietary information, which is protected by copyright
laws. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language or program language
without prior written consent of RFI Engineering B.V.
RefGuide_U-routerNGW_v1.01.docx Page: 13(57)
6.3 Accessing the U-router NGW WEB GUI
The U-router NGW WEB configuration interface can be accessed via static IP address assignment.
By default, the ETH interface is assigned a static IP address of 192.168.168.1.
In order to access this interface, you will have to configure your host system with a static IP address
on the 192.168.168.x subnet. Then launch your web browser.
Type https://192.168.168.1 in the address field and press ENTER or RETURN.
The login screen will appear. Enter rfi in the Username field and rfi123 in the password field of the
login box.
Figure 8: U-router NGW Login Screen
The U-router NGW configuration interface will appear, allowing you to customize your settings as
needed.
You can navigate through the Web GUI by clicking on the menu items on the left.

RFI U-router NGW Specifications

General

Brand	RFI
Model	U-router NGW
Category	Network Router
Language	English