The information contained in this document is subject to change. This document contains proprietary information, which is protected by copyright
laws. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language or program language
without prior written consent of RFI Engineering B.V.
RefGuide_U-routerNGW_v1.01.docx Page: 16(57)
8 Connecting the U-router NGW to the Mobile Network
In order to connect the U-router NGW to the mobile data network you will have to insert a SIM card
as described in paragraph 5.1.
In most cases, to configure your U-router NGW to connect to your mobile operator the only
information required is the APN and sometimes a username and password – all other fields may be
left at their defaults. When you purchase your mobile SIM card, your mobile operator will provide
you with various settings. These settings vary by operator and subscription and may include:
• APN
• Username & password
• PIN code
Activation of the mobile data connection can be done on the Mobile tab of the Web GUI. When your
SIM requires a PIN, this can also be configured on the same page.
For example, to configure the U-router NGW to connect to the Vodafone network in the Netherlands
you would need to enter the APN: office.vodafone.nl, user: vodafone, password: vodafone.
For example:
Figure 12: Example to configure APN for Vodafone in the Netherlands
To Next Page
Loading...
Need help?
General