The information contained in this document is subject to change. This document contains proprietary information, which is protected by copyright
laws. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language or program language
without prior written consent of RFI Engineering B.V.
RefGuide_U-routerNGW_v1.01.docx Page: 31(57)
The screenshot below shows the output from a Cisco device connected to the RS232 serial port of
the U-router NGW:
Figure 22: Connecting to the console port of a connected device from the Web GUI
To Next Page
Loading...
Need help?
General