Richmar HydraTherm - Foreword and Symbols Glossary; Foreword; Symbols Glossary; Cautionary Symbols

This manual is written to ensure the proper
and safe operation of the HydraTherm
Heating Unit. It contains general information
regarding replacement parts, operation,
safety precautions and maintenance. In
order to maximize safety, eciency and the
life of your Heating Unit, please read this
manual thoroughly and follow all instructions
prior to operating the unit.
Specifications and instructions put forth
in this manual are in eect at the time of
publication; however, due to Richmar's
policy of continued product improvement,
changes may be made to these
specifications and instructions at any time
without obligation on the part of Richmar.
CAUTIONS
Text under a "CAUTION" heading explains
possible safety infractions that could have
the potential to cause minor to moderate
injury or damage to equipment.
WARNINGS
Text under a "WARNING" heading explains
possible safety infractions that could
potentially cause serious injury and
equipment damage.
DANGER
Text under a "DANGER" heading explains
possible safety infractions that are
imminently hazardous situations that could
result in death or serious injury.
DANGEROUS VOLTAGE
Text under a "DANGEROUS VOLTAGE"
heading indicator serves to inform the user
of possible hazards resulting in an electrical
charge.
NOTE: Throughout this manual, “NOTE”
may be found. These notes are helpful
information to add in the particular area or
function being described.
ATTENTION: Refer to the
Instruction Manual/ Booklet
Type B equipment
Indicates a requirement not to
dispose of WEEE as municipal
waste.
The following labels are located on the
electrical enclosure in the rear of the unit.
HAZARDOUS
VOLTAGE
This unit is to be serviced
by trained personnel only.
WARNING
Hazardous Voltage
High Voltage is present in the electrical
enclosure located in the rear of the unit.
Service should only be accomplished by
trained personnel.
Explosion Hazard
Due to the high temperatures in which the
unit operates, do not use this unit in the
presence of flammable anesthetics.
Water Temperature
Check water temperature periodically to
ensure temperature does not exceed 160°F
(77°C). For personal safety and patient
safety, please observe the cautions as
outlined in the label below.
Hot Surface
Hot surface. Do not touch.
Classification
Classified by SGS North America Inc.
Consumer Testing Services (USA Only)
2
FOREWARD
SYMBOLS GLOSSARY