Ricoh Aficio 1075 User Manual

Troubleshooting
118
6
C
CC
C
Press the {
{{
{Down}
}}
} key.
The key blinks while the bottom
plate is moving down.
D
DD
D
Load paper by repeating steps
B
BB
B
and
C
CC
C
.
Note
❒ The tray can hold up to 4,000
sheets.
E
EE
E
Close the top cover of the large ca-
pacity tray (LCT).
Important
❒ Align the left edge of the copy
paper stack to the left edge of
the tray.
Loading Paper in the Interposer
Important
❒ Load paper on the side already
printed (the side you want as
front).
❒ Load paper in the interposer in the
same orientation as paper in the
paper tray.
❒ The staple or punching location
will be on the left side of the paper,
when you are facing the machine.
❒
Do not place anything on top of or
leave documents on the sensor. This
may lead to the paper size not being
correctly scanned or paper jams.
A
AA
A
Load the paper.
Important
❒ Confirm the top of the stack is
not higher than the limit mark
inside the tray.
Note
❒ Shuffle paper before loading.
❒ Straighten curled or warped pa-
per before loading.
B
BB
B
Adjust the paper guides to the pa-
per size.
MartiniC1_GBzen2_FM.book Page 118 Friday, April 19, 2002 2:18 PM

Ricoh Aficio 1075 Specifications

General

Print Speed	75 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	300, 000 pages
Max Paper Size	A3
Scan Resolution	600 x 600 dpi
Scan Speed	Up to 75 ipm
Copy Speed	75 cpm
Copy Resolution	600 x 600 dpi
Warm-up Time	30 seconds
Zoom Range	25% - 400%
Fax (Optional)	Yes
Memory (Standard)	256 MB
Hard Disk Drive	Optional
Power Consumption (Maximum)	1, 500 W
Type	All in One Printer
Functions	Print, Copy, Scan
Connectivity	USB, Ethernet
Scanner Type	Flatbed and ADF
First Print Time	4.5 seconds
Operating System Compatibility	Windows, macOS, Linux