Ricoh Aficio 1075 User Manual

Where to Put Your Machine
153
7
• When the main power switch is in the Stand-by position, the optional anti-
condensation heaters are on. In case of emergency, unplug the machine's
power cord.
• When you unplug the power cord, the anti-condensation heaters turn off.
• Make sure that the plug is firmly inserted in the outlet.
• Voltage must not fluctuate more than 10%.
• The socket-outlet should be installed near the equipment and should be easily
accessible.
Access to the Machine
Place the machine near the power source, providing clearance as shown.
1.
Rear: more than 5 cm (2")
2.
Right: more than 4 cm (1.6")
3.
Front: more than 70 cm (27.5")
4.
Left: more than 5 cm (2")
Note
❒ For required space when options are installed, contact your service represent-
ative.
MartiniC1_GBzen2_FM.book Page 153 Friday, April 19, 2002 2:18 PM

Ricoh Aficio 1075 Specifications

General

Print Speed	75 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	300, 000 pages
Max Paper Size	A3
Scan Resolution	600 x 600 dpi
Scan Speed	Up to 75 ipm
Copy Speed	75 cpm
Copy Resolution	600 x 600 dpi
Warm-up Time	30 seconds
Zoom Range	25% - 400%
Fax (Optional)	Yes
Memory (Standard)	256 MB
Hard Disk Drive	Optional
Power Consumption (Maximum)	1, 500 W
Type	All in One Printer
Functions	Print, Copy, Scan
Connectivity	USB, Ethernet
Scanner Type	Flatbed and ADF
First Print Time	4.5 seconds
Operating System Compatibility	Windows, macOS, Linux