Ricoh Aficio 1075 User Manual

59
5. NetWare Configuration
This chapter describes how to configure the machine to use as a print server or
a remote printer in a NetWare environment.
Note
❒ NetWare must be set to active using the machine's control panel. For more in-
formation about how to set it, see the General Settings Guide.
Installing the NIB Setup Tool
A utility called the NIB Setup Tool is provided to configure the machine to work
in a network environment. This section describes how to install the SmartNet-
Monitor for Admin, and how to run the NIB Setup Tool.
Limitation
❒ The NIB Setup Tool is supported to work with the following operating sys-
tems.
• Microsoft Windows 95/98/Me
• Microsoft Windows 2000/XP
• Microsoft Windows NT 4.0
❖
❖❖
❖ SmartNetMonitor for Admin
Using a printer in a NetWare environment, configure the NetWare printing
environment by using SmartNetMonitor for Admin.
Note
❒ If you configure the NetWare printing environment by using SmartNet-
Monitor for Admin under the following environments, NetWare Client
provided by Novell is required.
• NDS mode in Windows 95/98/Me
• NDS or Bindery mode in Windows 2000/Windows NT 4.0

Ricoh Aficio 1075 Specifications

General

Print Speed	75 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	300, 000 pages
Max Paper Size	A3
Scan Resolution	600 x 600 dpi
Scan Speed	Up to 75 ipm
Copy Speed	75 cpm
Copy Resolution	600 x 600 dpi
Warm-up Time	30 seconds
Zoom Range	25% - 400%
Fax (Optional)	Yes
Memory (Standard)	256 MB
Hard Disk Drive	Optional
Power Consumption (Maximum)	1, 500 W
Type	All in One Printer
Functions	Print, Copy, Scan
Connectivity	USB, Ethernet
Scanner Type	Flatbed and ADF
First Print Time	4.5 seconds
Operating System Compatibility	Windows, macOS, Linux