To Next PageTo Next Page
Why is the charge roller current leaking on my Ricoh Copier?
A charge roller current leak in your Ricoh Copier may be due to a defective charge roller, a defective high voltage supply board, or a loose connection of the PCU. Inspect these components.
What to do if Ricoh All in One Printer shows size error in Combine mode?
If you encounter a 'Size error in Combine mode' message on your Ricoh All in One Printer, it indicates that the paper size you are using is not compatible with the Combine function. To resolve this, use copy paper with a length under 14.01 inches.
What causes the laser synchronization error on a Ricoh Copier?
A laser synchronization error on your Ricoh Copier could be due to several reasons: * Toner bottle not installed * Loose connection between the LD unit and the BICU * Defective cable between the BICU and LD unit * LD unit out of position * Defective LD unit * Defective BICU
Why is the main motor error appearing on my Ricoh Copier?
A main motor error on your Ricoh Copier might be due to an overload or a defective main motor. Check these potential causes.
What causes the image transfer error on Ricoh Copier?
An image transfer error on the Ricoh Copier can be caused by a defective BICU board or a defective controller board. Check these components.
What causes fusing overheat error 1 on a Ricoh Copier?
If your Ricoh Copier shows a fusing overheat error 1, it could be due to a defective thermistor or a defective power supply unit. Examine these components to fix the problem.
Why is my Ricoh Copier showing a fusing temperature warm-up error?
A fusing temperature warm-up error in your Ricoh Copier can be caused by a defective thermistor, incorrect installation of the thermistor, a defective fusing lamp, or a defective power supply unit. Check these components to resolve the issue.
How to fix 'Cannot dup. copy this size' error on Ricoh Printer?
The "Cannot dup. copy this size" error on your Ricoh Printer occurs because the selected paper size is not compatible with the Duplex function. The paper sizes available for the Duplex function are A4L and B5 JISL. Select one of these sizes.
What to do if I get a 'Size error in Combine mode' on my Ricoh Printer?
The "Size error in Combine mode" on your Ricoh Printer means that the paper size is not available with the Combine function. To fix this, use copy paper with a length under 357 mm.
Why does my Ricoh Printer say 'Cannot sort this size'?
The "Cannot sort this size" error on your Ricoh Printer indicates that the paper size you are using is not available with the Sort function. To resolve this, use copy paper with a length under 357 mm.
General| Print Technology | Laser |
|---|---|
| Functions | Print, Copy, Scan |
| Print Speed | 15 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 15 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Max Paper Size | A4 |
| Paper Capacity | 250 sheets |
| Memory | 16 MB |
| Interface | USB 2.0 |
| Supported OS | Windows, Mac OS |
