Ricoh Aficio 240W - Page 101

DRAFT 2003/11/12
Settings You Can Change with User Tools
91
4
Note
❒ Default:
• Metric version: Up: 20 mm/Right: 20 mm
• Inch version: Up: 0.8"/Right: 0.8"
❒ The orientation/distance can be set as follows:
• Metric version: Up: 200 mm - Down: 200 mm (1 mm increments)
Right: 200 mm - Left: 200 mm (1 mm increments)
• Inch version: Up: 7.8" - Down: 7.8" (0.1" increments)
Right: 7.8" - Left: 7.8" (0.1" increments)
❖
❖❖
❖ Erase Brdr. Width
Specifies the default setting for Erase Border. See p.45 “Erase Border”.
Use [+] or [-] to make the setting.
Note
❒ Default:
• Metric version: 10 mm
• Inch version: 0.4"
❒ The width can be set as follows:
• Metric version: 3 mm - 50 mm (1 mm increments)
• Inch version: 0.1" - 2.0" (0.1" increments)
❖
❖❖
❖ Repeat Sep. Line
Specifies the separation line type. See p.50 “Image Repeat”.
• None
• Solid
• Broken A
• Broken B
• Crop Marks
Note
❒ Default: None
❖
❖❖
❖ 2xCopies Sep.Line
Specifies whether or not to use a separation line for Double Copies. See p.50
“Double Copies”.
The separation line is dotted.
• None