DRAFT 2003/11/12
Copying
24
2
E Press [Exit].
The Job list is displayed on the
screen.
Interrupt Copy
Use this function to interrupt a long
copy job to make urgently needed
copies.
Limitation
❒ You cannot use Interrupt Copy
while the following types of copy-
ing are in progress.
• Copying from the bypass tray
• Image Overlay/Format Over-
lay
Note
❒ The number of originals is counted
from “1” when you use Interrupt
Copy.
A
AA
A
Press the {
{{
{Interrupt}
}}
} key.
The Interrupt key indicator lights.
The current copy is ejected, and the
machine stops ejecting copies.
B
BB
B
Make the settings for the Inter-
rupt Copy job.
Limitation
❒ You cannot use the settings for
Sort, Rotate Sort, Double Cop-
ies, Image Repeat, Image Over-
lay, Format Overlay, Stamp,
Erase, or Job Preset.
C
CC
C
Place your originals.
D
DD
D
When copying has finished, re-
move the copy output for the In-
terrupt Copy job.
E
EE
E
Press the {
{{
{Interrupt}
}}
} key again.
The Interrupt key indicator goes
off.
Resuming the previous copy job
A Place your originals, or press
the {
{{
{Start}
}}
} key.
Exiting interrupt copy
A Press the {
{{
{Clear Modes}
}}
} key.
Sample Copy
Use this function to copy the first part
(0 – 250 mm (0 – 10")) of an original to
a length of 280 mm (11"). This allows
you to check the copy settings before
starting a full copy run.
Note
❒ When you use cut paper, the
whole surface of the original is
copied. You can specify the start
position.
Reference
Related default settings:
p.87 “Sample Copy Pos.”
ABB545S
To Next Page
Loading...
