Ricoh Aficio 240W - Turning On the Power

DRAFT 2003/11/12
Basic Procedure
23
2
Note
❒ To cancel a setting while mak-
ing the preset settings, press the
{
{{
{Clear Modes}
}}
} key.
C
CC
C
Place the originals. The machine
scans them.
When copying finishes, the preset
job starts automatically.
Quick preset
A
AA
A
Place originals when copies are
being ejected. The machine scans
them.
When copying finishes, the preset
job starts automatically.
Checking a job preset
Both Standard Preset and Quick
Preset are displayed.
A Press the {
{{
{New Job}
}}
} key.
Note
❒ If three or more copy jobs are
preset, display the job preset
you want to check using the
01 keys.
❒ If you press [Exit], the current
copy job is displayed.
Adding a job preset
Limitation
❒ If you delete a preset job when
the optional HDD is not in-
stalled, you cannot add another
until all remaining preset jobs
are finished.
A Press the {
{{
{New Job}
}}
} key.
B Press [New Job], and then make
the settings for the copy job
you want to preset.
C Place the originals. The ma-
chine scans them.
A job preset is added.
Deleting a job preset
A Press the {
{{
{New Job}
}}
} key.
B Press [Delete].
C Enter the number of the job
you want to delete using the
number keys, and then press
the {
{{
{#}
}}
} key.
Note
❒ If the number of the job pre-
set you want to delete is not
displayed, scroll to it using
the 01 keys.
D Press [Yes].
Note
❒ To delete another job preset,
repeat steps C to D .