Ricoh Aficio 240W - Setting Folded Originals (the Original Switching Lever); Setting Rolled Originals

DRAFT 2003/11/12
Basics
18
1
Note
❒ Align the original with the fold
of the carrier sheet.
B
BB
B
Using both hands, hold the origi-
nal copy side down, and carefully
insert the folded edge of the carri-
er sheet into the insertion area.
Setting Folded Originals (the
Original Switching Lever)
When setting folded originals such as
drawings, you can make copies with
the fold lines erased.
Limitation
❒ Originals thicker than 157 g/m
2
(41.8 lb.) cannot be used.
A
AA
A
Move the original switching le-
vers at both sides of the machine
to the front.
Setting Rolled Originals
When setting rolled originals, you
can make copies using the lower out-
put auxiliary guide.
A
AA
A
Pull the lower output auxiliary
guide out and forward.
B
BB
B
Place the rolled original on the
lower output auxiliary guide.
C
CC
C
Pull the leading edge of the origi-
nal up to the original table, and
then adjust the original guides to
the paper width.
D
DD
D
Using both hands, carefully insert
the original between the original
guides, copy side to down.
Note
❒ Do not apply excessive force to
the lower output auxiliary
guide.
ABB534S
AAJ539S
AAJ537S
AAJ538S