DRAFT 2003/11/12
Copier Functions
43
2
Margin Adjustment
When Synchro Cut is selected, you
can create a margin for the original's
leading and trailing edge, cut un-
wanted parts from the copy.
Preparation
You can select the following types
of margin for this function:
• Top (+): margin at the leading
edge of the original (top of
copy).
• Top (-): reduces leading edge
margin of the original (top of
copy).
• Bottom (+): margin at the trail-
ing edge of the original (bottom
of copy).
• Bottom (-): reduces trailing edge
margin of the original (bottom
of copy).
You can set the margin from -200
to +200 mm, in 1 mm increments
(from -7.8" to 7.8", 0.1" increments).
The default margin setting is 20
mm (0.8").
You can set the margin using dis-
tance (mm) from either top or bot-
tom.
The copy length is the specified
length plus or minus the margin.
Reference
p.34 “Synchro cut”
Related default settings:
p.90 “Margin Adjustment”
A
AA
A
Press the {
{{
{Shift/Erase}
}}
} key.
B
BB
B
Press [Margin].
ZEDG120E
ABB557S
To Next Page
Loading...
