DRAFT 2003/11/12
Settings You Can Change with User Tools
93
4
• For Your Info.
• DRAFT
• PRELIMINARY
• For Internal Use Only
• CONFIDENTIAL
Note
❒ Default: COPY
❖
❖❖
❖ Stamp Settings
Specifies the stamp orientation, position, size, and density for each preset
stamp (COPY, URGENT, PRIORITY, For Your Info., DRAFT, PRELIMI-
NARY, For Internal Use Only, CONFIDENTIAL). You can make separate set-
tings for both horizontal and vertical. See p.55 “Preset Stamp”.
• Orientation (Normal, Rotate 90deg.)
• Position (Top left, Top center, Top right, Left center, Center, Right center,
Bottom left, Bottom center, Bottom right)
• Adjust
• Left/Right:
• Metric version: 4 - 280 mm
• Inch version: 0.16 - 11.0"
• Top/Bottom:
• Metric version: 4 - 400 mm
• Inch version: 0.16 - 15.7"
• Center (Left/Right):
• Metric version: Left 140 - Right 140 mm
• Inch version: Left 5.5 - Right 5.5"
• Center (Top/Bottom):
• Metric version: Left 200 - Right 200 mm
• Inch version: Left 7.9 - Right 7.9"
• Size (1X, 2X, 4X, 8X)
• Density (Normal, Lighter, Lightest)
Note
❒ Default:
• Orientation: Normal
• Position: Bottom right
• Adjust
• Left/Right:
• Metric version: 24 mm
To Next Page
Loading...
