DRAFT 2003/11/12
Troubleshooting
74
3
Streaks, scratches, or wrinkles
appear in areas of solid black.
Copy paper has been changed
from plain to translucent pa-
per, or from translucent to
plain paper.
After switching from plain to
translucent paper, wait one
minute. After switching from
translucent to plain paper,
wait two minutes before mak-
ing copies.
Shadows appear on the cop-
ies.
The original is two-sided, or
the image density setting is
too dark.
Adjust the image density set-
ting. See p.30 “Adjusting
Copy Image Density”.
Copies are blurred. Continuous copies have been
made on small sized paper.
Wait about two minutes, and
then try copying again.
Problem Causes Solutions
To Next Page
Loading...
