DRAFT 2003/11/12
Settings You Can Change with User Tools
87
4
• Custom Setting
Note
❒ Default: Normal
❒ [Custom Setting]: Your service representative will set this to meet your re-
quirements. For details, consult your service representative.
❖
❖❖
❖ Orig.Mode Density
Specifies the copy image density for each original type (Text, Text/Photo,
Photo, Drawing, Pale, Generation Copy, Background Lines, Sharpen Text).
• Light
• Normal
• Dark
Note
❒ Default: Normal
❖
❖❖
❖ Copy Mode in Sort
Specifies whether all originals should be scanned before starting copying,
when using Sort. Or, whether copying should start while originals are still be-
ing scanned. See p.35 “Sort/Rotate Sort”.
• Copy after Scan
• Copy during Scan
Note
❒ Default: Copy after Scan
❖
❖❖
❖ Sample Copy Pos.
Specifies the default dimensions for Sample Copy. See p.24 “Sample Copy”.
Note
❒ Default: 0.0"
❒ The dimensions can be set from 0 to 250 mm (10").
❖
❖❖
❖ Partial Copy Size
Specifies the default dimensions for the start point (Y1) and end point (Y2) in
Partial Copy. See p.25 “Partial Copy”.
Note
❒ Default:
• Y1: 0 (0")
• Y2: 280 mm (11")
To Next Page
Loading...
