Sending Scan Files by E-mail
14
1
Basic Operation for Sending Scan Files by
E-mail
This section describes the basic operation for sending scan files by e-mail.
A Make sure that no previous settings remain.
If a previous setting remains, press the {Clear Modes} key.
B If the network delivery scanner screen or Scan to Folder screen appears,
switch to the E-mail screen.
For details, see "Switching to the E-mail Screen".
C Place originals.
D If necessary, press [Scan Settings] to specify scanner settings such as scan
type, resolution, image density, or scan size.
For details, see "Various Scan Settings".
E If necessary, press [1 Sided Orig.] or [2 Sided Orig.] to scan one or both sides of
the originals.
For details, see "Setting for Scanning Sides of Originals".
F If necessary, press [Original Feed Type] to specify settings such as original ori-
entation.
For details, see "Setting of Original Feed Type".
G If necessary, press [File Name / Type] to specify settings such as file name and
file format.
For details, see "Setting File Type and File Name".
H Specify the destination.
You can specify multiple destinations.
For details, see "Specifying E-mail Destinations".
I To specify the e-mail sender, press [Attach Sender's Name].
For details, see "Specifying the E-mail Sender".
To Next Page
Loading...
