Ricoh Aficio MP 3500SP - Specifying the E-Mail Message; Selecting a Message from the List

Sending Scan Files by E-mail
30
1
Specifying the E-mail Message
This section explains how to specify the e-mail message.
The message can be created in the following ways:
• Select the e-mail message from the list
• Enter the message directly
Selecting a Message from the List
You can select a message from the list.
Important
❒ The messages that can be selected from the list must be registered in [System
Settings] in advance. For details, see General Settings Guide.
A Press [Subject / Message].
B Press [E-mail Message].
C Select a message.
D Press [OK] twice.