Sending Scan Files by Scan to Folder
56
2
Registering the Path to the Selected Destination in the Address
Book
This section explains how to register folder paths you have entered manually or
specified by browsing the network to the machine's address book.
A In the destination field, display the destination you want to register.
B Press [ProgDest].
C Press [Names], and then specify the name and other information to be regis-
tered.
For details about specifying the information to be registered, see General Set-
tings Guide.
D Press [OK].
Note
❒ Depending on the security setting, [ProgDest] may not appear.
To Next Page
Loading...
