Ricoh Aficio MP 3500SP - Sending Files to Netware Server

Sending Scan Files by Scan to Folder
52
2
Sending Files to NetWare server
This section explains how to specify destinations when sending files to NetWare
server.
The NetWare folder of the destination can be specified in an NDS tree or on a
NetWare Bindery server, depending on the NetWare environment. Consult
your administrator.
You can send a file to NetWare server by any of the following methods:
• Enter the destination path of the NetWare server directly
• Specify the path by browsing to the destination on the NetWare server
Entering the destination path of the NetWare server directly
You can directly enter the destination folder path of the NetWare server.
A Press [Enter Destination].
B Press [NCP].
C Select the connection type.
Press [NDS] to specify a folder in the NDS tree.
Press [Bindery] to specify the folder on the NetWare Bindery server.
D Press [Manual Input] on the right side of the path field.
The soft keyboard appears.