Ricoh Aficio MP 3500SP - Preparation for Sending by Scan to Folder

Before Sending Files by Scan to Folder
37
2
Sending files to a NetWare server
1. This machine
You can send scan files to NetWare fold-
ers. To send scan files to NetWare fold-
ers, use the NCP protocol.
2. NetWare Server
You can use this server to share files over
the network via NetWare. By sending im-
age data to the server, files can be stored
on the server.
3. Client computer
To download files, a computer must be
running the NetWare client and be
logged onto the server.
Preparation for Sending by Scan to Folder
This section describes the preparations and settings for sending scan files by
Scan to Folder.
Important
❒ Files can be sent to shared folders on client computers.
❒ Files can also be sent to FTP servers if any exist on the network.
❒ Files can also be sent to NetWare servers if any exist on the network.
A Connect the machine to the network.
Connect the machine to the network using an Ethernet cable or wireless LAN
(IEEE 802.11b).
ZZZ511S