of a user registered in the machine, the two instances are treated as referring to the same user. You
can enter an attribute such as "serialNumber" or "uid". Additionally, you can enter "cn" or
"employeeNumber", provided it is unique. If you do not specify the Unique Attribute, an account with
the same user information but with a different login user name will be created in the machine.
12. Select [Function Permissions] using [ ] or [ ], and then press the [OK] key.
13. Select which of the machine's functions you want to permit using [ ] or [ ], and then press
the [ ] key.
The box next to a selected item is checked. To deselect the item, press [ ].
LDAP Authentication will be applied to the selected functions. Users can use the selected functions
only.
14. Press the [OK] key.
15. Select [Printer Job Authentication] using [ ] or [ ], and then press the [ ] key.
16. Select the "Printer Job Authentication" level.
If you select [Entire] or [Simple (All)], proceed to "Selecting Entire or Simple (All)".
If you select [Simple (Limitation)], proceed to "Selecting Simple (Limitation)".
For a description of the printer job authentication levels, see "Printer Job Authentication".
LDAP Authentication
73
To Next Page
Loading...
Need help?
General
