17. Select which of the machine's functions you want to permit using [ ] or [ ], and then press
the [ ] key.
The box next to a selected item is checked. To deselect the item, press [ ].
Integration Server Authentication will be applied to the selected functions.
Users can use the selected functions only.
18. Press the [OK] key, and then press the [Escape] key twice.
19. Select [SSL] using [ ] or [ ], and then press the [OK] key.
20. Select [On] using [ ] or [ ], and then press the [OK] key.
To not use secure sockets layer (SSL) for authentication, press [Off].
21. Press [Exit].
3. Users/Authentication and Its Application
82