Ricoh Aficio MP C3500 General Settings Guide

Facsimile Features
160
4
Changing the User Parameters
This section describes how to set parameters.
Important
❒ Access to some User Parameter Settings may require options, or other settings
may need to be made beforehand.
❒ It is recommended that you print and keep a User Parameter list when you
program or change a User Parameter.
❒ Do not change any bit switches other than those shown on the previous pages.
A Press [Facsimile Features].
B Press [Initial Settings].
C Press [Parameter Setting].
D Select the switch number you want to change.
E Select the bit number you want to change.
When the bit number is pressed, the current value switches between 1 and 0.
Repeat from step
E
to change another bit number for the same switch.
F Press [OK].
To cancel these settings, press [Cancel]. The display returns to that of step
D
.
G Repeat step
D
through step
E
to change the switch settings.
H After all the settings are finished, press [Exit].
I Press the {User Tools/Counter} key.

Ricoh Aficio MP C3500 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (Black)	35 ppm
Print Speed (Color)	35 ppm
Copy Speed (Black)	35 cpm
Copy Speed (Color)	35 cpm
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	3 seconds per page
Max Paper Size	12" x 18"
Duplex Printing	Yes
Interface	Ethernet 10/100Base-TX, USB 2.0
Power Source	120V, 60Hz
Type	Multifunction
Zoom Range	25% - 400%
Scan Resolution	600 dpi
Scan Speed	50 ipm
Memory (Maximum)	1 GB
Hard Disk Drive	40 GB
PDL	PCL5c, PCL6, Adobe PostScript 3
Dimensions (W x D x H)	26.4" x 26.7" x 29.1"
Operating System Compatibility	Windows, Mac OS, Linux