Ricoh Aficio MP C3500 General Settings Guide

Interface Settings
63
2
❖ Host Name
Specify the host name.
Enter the host name using up to 63 characters.
❖ Machine Name
Specify the machine name.
Enter the machine name using up to 31 characters.
Parallel Interface
This section describes the user tools in the Parallel Interface menu under Inter-
face Settings.
[Parallel Interface] is displayed when this machine is installed with the IEEE 1284
interface board.
❖ Parallel Timing
Sets the timing for the control signal of the parallel interface.
• ACK Outside
•ACK Inside
•STB Down
❖ Parallel Communication Speed
Sets the communication speed for the parallel interface.
• High Speed
•Standard
❖ Selection Signal Status
Sets the level for the select signal of the parallel interface.
• High
•Low
❖ Input Prime
Sets whether to validate or invalidate the input prime signal upon reception.
•Active
• Inactive
❖ Bidirectional Communication
Sets the printer's response mode to a status acquisition request when using a
parallel interface.
• On
•Off
When set to [Off], the bidirectional communication function will be disabled,
and the printer driver will not be installed under Windows Auto Detect func-
tion.

Ricoh Aficio MP C3500 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (Black)	35 ppm
Print Speed (Color)	35 ppm
Copy Speed (Black)	35 cpm
Copy Speed (Color)	35 cpm
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	3 seconds per page
Max Paper Size	12" x 18"
Duplex Printing	Yes
Interface	Ethernet 10/100Base-TX, USB 2.0
Power Source	120V, 60Hz
Type	Multifunction
Zoom Range	25% - 400%
Scan Resolution	600 dpi
Scan Speed	50 ipm
Memory (Maximum)	1 GB
Hard Disk Drive	40 GB
PDL	PCL5c, PCL6, Adobe PostScript 3
Dimensions (W x D x H)	26.4" x 26.7" x 29.1"
Operating System Compatibility	Windows, Mac OS, Linux
Print Resolution	Up to 1200 x 1200 dpi