Ricoh Aficio MP C3500 General Settings Guide

Connecting the Machine
8
1
Connecting to the USB Interface
Connect the USB2.0 interface cable to the USB2.0 port.
A Connect the USB2.0 interface cable to the USB2.0 port.
B Connect the other end to the USB2.0 port on the host computer.
Note
❒ This machine does not come with a USB interface cable. Make sure you
purchase the appropriate cable for the machine and your computer.
❒ The USB2.0 interface board is supported by Windows Me / 2000 / XP,
Windows Server 2003, Mac OS X 10.3.3 or higher.
• For Windows Me:
Make sure to install "USB Printing Support". When used with Windows
Me, only a speed equal to that of USB1.1 is possible.
•For Mac OS:
To use Macintosh, the machine must be equipped with the optional
PostScript 3 unit. When used with Mac OS X 10.3.3 or higher, a transfer
speed of USB2.0 is supported.
❒ For details about installing the printer driver, see "Preparing the Machine",
Printer Reference.
Reference
"Preparing the Machine", Printer Reference
AQS014S

Ricoh Aficio MP C3500 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (Black)	35 ppm
Print Speed (Color)	35 ppm
Copy Speed (Black)	35 cpm
Copy Speed (Color)	35 cpm
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	3 seconds per page
Max Paper Size	12" x 18"
Duplex Printing	Yes
Interface	Ethernet 10/100Base-TX, USB 2.0
Power Source	120V, 60Hz
Type	Multifunction
Zoom Range	25% - 400%
Scan Resolution	600 dpi
Scan Speed	50 ipm
Memory (Maximum)	1 GB
Hard Disk Drive	40 GB
PDL	PCL5c, PCL6, Adobe PostScript 3
Dimensions (W x D x H)	26.4" x 26.7" x 29.1"
Operating System Compatibility	Windows, Mac OS, Linux