Ricoh Aficio MP C3500 General Settings Guide

Connecting to the Interfaces
13
1
❖ When using in adhoc mode / 802.11 ad hoc mode
1. If the IEEE 802.11b interface unit is functioning, the LED lights up in or-
ange.
2. If it is connected properly to the network, the LED is green when in ad hoc
mode or 802.11 ad hoc mode. If the LED is blinking, the machine is searching
for devices. The LED will light after a few seconds.
Print the configuration page to verify settings.
Note
❒ For more information about printing a configuration page, see "Print List".
Reference
p.188 “Printing the configuration page”
Checking the Signal
When using in infrastructure mode, you can check the machine's radio wave sta-
tus using the control panel.
A Press [System Settings].
B Press [Interface Settings].
C Press [IEEE 802.11b].
D Press [Wireless LAN Signal].
The machine's radio wave status appears.
E After checking radio wave status, press [Exit].
F Press the {User Tools/Counter} key to return to the User Tools / Counter / En-
quiry menu.
Note
❒ To check the radio wave status, press [IEEE 802.11b] under [LAN Type] in Net-
work menu of Interface Settings.
Reference
p.37 “Using Utilities to Make Network Settings”
p.66 “IEEE 802.11b”
ZGDH600J
1
2

Ricoh Aficio MP C3500 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (Black)	35 ppm
Print Speed (Color)	35 ppm
Copy Speed (Black)	35 cpm
Copy Speed (Color)	35 cpm
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	3 seconds per page
Max Paper Size	12" x 18"
Duplex Printing	Yes
Interface	Ethernet 10/100Base-TX, USB 2.0
Power Source	120V, 60Hz
Type	Multifunction
Zoom Range	25% - 400%
Scan Resolution	600 dpi
Scan Speed	50 ipm
Memory (Maximum)	1 GB
Hard Disk Drive	40 GB
PDL	PCL5c, PCL6, Adobe PostScript 3
Dimensions (W x D x H)	26.4" x 26.7" x 29.1"
Operating System Compatibility	Windows, Mac OS, Linux
Print Resolution	Up to 1200 x 1200 dpi