6. Place the original on the exposure glass or in the ADF.
7. To make multiple copies, enter the number of copies using the number keys.
8. Press the [Start] key.
When you place the original on the exposure glass, perform the following steps to scan the
subsequent pages of the original.
9. When the current page is scanned, place the next page on the exposure glass, and then
press the [Start] key.
10. Repeat Step 9 until all the pages of the original are scanned.
• To apply the specified setting to all jobs, specify [Combine] in [Copier Features].
4. Copying Originals
56
To Next Page
Loading...
