Sending a fax using On Hook Dial
The On Hook Dial function allows you to check the destination's status while listening to the tone from the
internal speaker. This function is useful when you want to ensure that the fax will be received.
• To send faxes using the exposure glass, be sure to first remove any originals loaded in the ADF.
1. Press the [Facsimile] key.
2. Place the original on the exposure glass or in the ADF.
3. Press the [ID Card Copy/On Hook Dial] key.
4. Add a destination by using one of the following methods:
To add a Speed Dial destination
1. Press the [Speed Dial] key.
6. Sending and Receiving a Fax
90
To Next Page
Loading...
