187
Measure
The camera's clock is incorrectly set or the camera's clock information has been reset. To allow
the [The same image will not be saved] function to work properly, the camera's clock information
must be set properly. Set it properly. (See P.119.)
Measure
If [The same image will not be saved] is checked in the Ricoh Gate La Optional Settings, files
loaded into your computer once cannot be loaded again. In the Ricoh Gate La Optional Settings,
uncheck [The same image will not be saved]. (See P.139)
Measure
DirectX may not be installed (only for Windows 98/98SE/Me/2000). Install DirectX from the
Caplio CD-ROM. (See P.131)
Measure
Connect the camera to the computer through the USB cable, and then open My Computer from
the Start menu on Windows Taskbar. Right-click the camera icon on the My Computer screen
and click Properties to open the camera's Properties screen. Click the [Event] tab on the Prop-
erties screen. For the computer operation, select "None" or "Select Program to Execute " and
click OK. If "None" is selected, nothing happens when the camera is connected to the computer.
If "Select Program to Execute" is selected, a screen is displayed each time the camera is con-
nected to the computer. Then you can choose a program to activate.
Symptom 2 Even if you check [The same image will not be saved] in the Ricoh Gate La
Optional Settings, the same images are loaded into your computer.
Symptom 3 Files loaded from the camera into the computer were deleted. You
attempted to load the same files from the camera again but failed.
Symptom 4 Cannot play back movies
Symptom 5 RICOH Gate La is always activated when the camera is connected to a
Windows XP computer through a USB cable.running Windows XP, via USB
connection.
To Next Page
Loading...
