48
2
Using the Fn (Function) Button
Locking the Exposure
Assigning [ AE Lock] to the Fn button (GP.47) and then pressing the
Fn button during shooting allows you to lock or cancel the exposure.
1
Set [Set Fn Button] to [AE Lock] on the setup menu.
• For the operating procedure, see P.47.
2
With the camera ready to shoot, position subject in the
center of the picture display and press the Fn button.
• The exposure is locked and the AEL
mark, aperture value, and shutter
speed appear on the screen.
• Pressing the Fn button again cancels
the AE lock.
Note -------------------------------------------------------------------------------------
• The AE lock function cannot be used in movie mode.
• The AE lock function can only be used when [Time Exposure] is set to [Off].
To Next Page
Loading...
